Explanation

The purpose of this blog

The purpose of this blog is to act as storage for works from the SayNoTo Democide trivia blog that are Work In Progress or otherwise incomp...

Translate

Wednesday, July 18, 2018

* Real-life Cascadia & NATNWO government firearms & military, paramilitary & tactical combat uniforms

Unfinished/Incomplete/Work in progress.

DISCLAIMER: companies that design, create and/or manufacture firearms, to my knowledge, do NOT endorse their firearms being on this list, & the users of these firearms listed here are purely fictional.

Over the years, Cascadia has fought to defend its independence from the central banks. To help in this, the government looked at designs from around the world, and improved on them and added features.
Note: almost all manual action rifles had K98 “German style” sights, along with a bayonet mount if the original didn’t, & bolt action rifles had curved bolt handles if the originals didn’t.
Every long-gun will be equipped with a brown sling or, later on, camouflaged slings.

Also, even when export is permitted, most firearms go to civilians and the export of firearms to foreign governments are rarely permitted.

This list will not include artillery pieces.

Rifles and submachineguns:

Before 1860:
Lorenzoni repeaters.
Pepperbox rifles.
Girandoni air rifle.
Ferguson rifle in 75 caliber.
Kammerlader rifle in 10 bore.
Treeby chain gun with detachable belts.

1861-1864:
Henry repeating rifle (main rifle).
1858 Remington carbine.
LeMat Carbine.

1865-1896:
Winchester lever action series; all model 1873 rifles were chambered for 44-40, with a 12-gauge shotgun barrel on top.
The Remington Rolling-Block in 50-70 government (for snipers).
Winchester 1876 in .45-70.
Gewehr 1871.
Fusil Gras mle 1874.
Remington-Lee Model 1879, with post-1886 variants being chambered for 7.5x55mm.


1897-1936:
Mauser C96 carbine chambered for 7.62x25mm with a detachable magazine, detachable stock, select-fire, and finned barrel.
M1899.
It's based on the Mauser 98 action, but a few differences from the Mauser was a modified bolt handle & cock-on-close action to make it faster to fire, using the same magazine as the Browning Automatic Rifle would later use, coming standard with a scope mount, having a threaded-on muzzle brake, having an Arisaka-style monopod, & having checkering on the stock's pistol grip & on the hollowed out bolt knob.
Remington Model 8 in .25 Remington with 25 round detachable magazine.
Winchester 1907 with select-fire, 20 round magazine, and ejection port cover.


1921-1950’s submachinegun: Cascadian Thompson in 7.62x25mm, with a folding stock similar to the later M1A1 carbine and usually issued with a 100 round drum.
It was supplemented by the SIG MKMS in 7.63x25mm for crewed weapon & vehicle crews.
In 1939, in response to the influx of refugees in Europe who have little to no hands-on experience with firearms, the Cascadian government wanting to save a little money, & thanks to the capture & import of a German MP-38 by Military Intelligence, the SMG-39 was born. The SMG-39 is essentially what the MP-40 would have been if it was chambered for 7.62x25mm.

1936-1952:
M1937 Garand, essentially the BM59 Mark IV in 30-06 and taking BAR magazines.
M1 carbine with forward pistol grip and retracting wire stock.
Sturmgewehr 43/44 (captured, in limited use).
Sturmgewehr 45.

1953-1995:
FN FAL  sand cuts in the bolt and receiver, a large charging handle that can be used as a forward assist (like the Israeli FAL), sand cuts on the receiver, bolt, & bolt carrier, a top cover that allows the use of stripper clips and loading loose rounds, a Galil-style folding stock, folding trigger guard to use with Arctic mitts, large magazine release, large bolt catch, & large safety lever. Threaded heavy barrels were generally used with lengths from 8 to 22 inches. Most handguards were like the Israeli FAL with the addition of either a Galil-style bipod or, on post-1965 rifles, side-mounted bipods to fit the XM148 grenade launcher.
Supplied accessories are an L1A1 style folding charging handle, and an L1A1 style stock with a hooked buttplate.
A small number of modernized variants are still in storage to send to troops facing ammunition shortages for 7.62x51/.308.

G3 & HK33:
The NATNWO version has an ambidextrous four-position "safe, semi, 2/3 round burst, & fully-automatic" trigger group, free-floating match barrel, tungsten filled bolt carrier, heavy recoil buffer, reinforcing rods on the receiver, extended magazine release, extended charging handle, forward assist, shell deflector, bolt finger grooves, target-style pistol grip, & folding carrying handle.
Each individual firearm is also supplied with two stocks, being a four-position sliding stock, an adjustable stock, along with extended selector levers, & two hand-guards, one ventilated slim & one with a bipod.
Both with modernized features (mainly being rails) are, even after the 1990's, are still in limited use for personnel that are in absolute need to have compact rifles.

1978-1994: Steyr AUG.

1994 onward:

ACME Revolution, similar to real-life POF Revolution, with ModularLock rail interface system (identical to real-life M-LOK).
ACME Multi Caliber Rifle. Would be the same as a real-life Faxon Firearms ARAK-21/31 on a Windham Weaponry RCMS receiver.
ACME , similar to real-life Colt CM901.
ACME MDR (same as real-life DesertTech MDR).
ACME XCR, identical to real-life Robinson XCR.

Anti-tank and Anti-material rifles:
https://en.wikipedia.org/wiki/Anti-tank_rifle#Selected_anti-tank_rifles
https://en.wikipedia.org/wiki/Anti-materiel_rifle#List_of_anti-materiel_rifles
Mauser 1918 T-Gewehr, with muzzle brake and rubber buttpad.
Solothurn S-18/1000.
PTRS-41.
Denel NTW-20.
Istiglal.
PDShP.
Gepard series.
SR-25.
M110.
Accuracy International AWM.
Accuracy International AW50.
CheyTac Intervention.

Handguns:

Before 1860:
Pepperbox 

1861-1864:
1858 Remington revolver.
LeMat revolver.

1865-1897:

Revolvers:
S&W model 3 revolver chambered for 44-40, replaced by the S&W frontier revolver using the same cartridge, used alongside the Remington 1858 revolver with cartridge conversion.
These were later replaced by the Webley series of revolvers

Pistol (rarely used); 1893 Borchardt.

1898-1948:
C96
M1904 pistol. Physically identical to the real-life Chinese NT04 pistol.
M1911 Mod 1. Basically what would become the M1911A1, but in machine pistol form. Usually chambered for 7.62x25mm overpressure, but some were chambered for .45 ACP (especially for protection against wildlife).
The 7.62x25mm overpressure round is the 7.62x25mm Mauser but with an overpressure loading. It is identical to 7.62x25mm Tokarev.

1949-present:

UZI (replaced by H&K MP7).
Glock 18.
H&K MP7.
FN Five-seven. Shotguns:

Pre 1860:
Double-barreled 10 gauge shotguns.

1861-1864:
Colt 1855 10-gauge revolving shotgun (rare).

1865-1896:
Colt 1855 10-gauge revolving shotgun (rare).
Double-barrel 10-gauge.
Roper Revolving Shotgun.
Winchester 1887 in 10-gauge.

1897-1948:
Copy of Winchester 1897 "Brush Takedown", but with heat shield, bayonet lug, & sling swivels.
Browning Auto-5.

1194-1964:
Remington 11-48.

1964-1973:
Remington 1100.

1974-1990's:
KAC Masterkey.
Franchi SPAS-15.
Atchisson Assault Shotgun.

1990's onward:
Benelli M2 (replaced by Benelli M4).
KAC Masterkey.
VEPR-12.
Fostech-12.
AA-12.
Benelli M4.

Machine guns:

1865-1887:
Six barrel Gatling gun.
Gardner gun.

1887-present:

Heavy machine guns:
Browning water cooled. Identical to Browning M1917A1 but with an open-bolt mechanism, rate of fire of 850 rounds per minute, an open flip-up water-jacket cover and available with a wheel mount and gun shield similar to the PM M1910 machine gun.
Browning M2.
Kord machine gun.

Light machine guns:
Browning air-cooled identical to Browning M1919, but with an open-bolt mechanism, a rate of fire of 450 rounds per minute, and bull barrel with cooling rings.
Madsen Machine Gun.
Cascadian Browning Automatic Rifle
MG43 machine gun (copy of MG42 but with beefed up design and adjustments to reliably use 30-06 cartridge).
MG3.
FN MAG.
PKM machine gun.

Automatic grenade launchers:
MK19 grenade launcher.
Daewoo Precision Industries K4.
Type 87 grenade launcher.
AGS-30.
Vektor Y3 AGL (limited).
Mk 47 (limited).
XM307.

Under-barrel grenade launchers:
XM148.
M203.
HK79.

Other types of grenade launchers and shoulder-mounted rocket launchers:
Panzerfaust 250.
Carl Gustav recoilless rifle.
M72 LAW.
China Lake grenade launcher.
Milkor MGL.
Milkor UBGL.

Portable missile launchers:
FIM-43 Redeye.
RBS 70.
Mistral.
Starburst.
Starstreak.
Dard 120.
Javelin.

Other:
The newest recoilless rifles that NATNWO can procure to copy & manufacture.

Ammunition:
Armor-piercing incendiary.


Combat uniforms:

Since its war for independence began, the Cascadian armed forces (military, law enforcement, & civilian militia combined) always had troops wear "coyote brown" uniforms with black buttons.
In the mid 19th century, combat uniforms were made out of denim started to be issued as that they were more durable & better suited for rough military & paramilitary usage.

Later in the 19th century, more modern cotton tunics were in use.

In the early 20th century, cargo pants & a uniform shirt. It is similar to the real-world British Army's later Series 95 No.9 Tropical Combat dress in cut, but has different features, being;
Both:
. BDU-style covered buttons.
Shirt:
. Shoulder straps.
. Rounded collars that can be turned up into a standing collar, & closable with a button.
. Several breathing holes in the armpits.
. Angled bicep pockets.
. Cuff with internal button.
. Optional triple pencil holders on forearms.
Pants:
. Diamond crotch.
. Large bellowed side cargo pockets with inverted pleats.
. Bellowed rear pockets.
. Front slash pockets.
. Bellowed "pistol magazine" pockets over slip pockets on thighs & calfs.
. Reinforced knees. Since the 1950's, reinforced knees had velcro closures to allow the insertion of internal knee pads.
. Reinforced seat.
. Blousing strings.

Material weight: 3.7 oz(?).

These were were adopted for general use. There were two main colors: coyote brown for ground-based wearers, & midnight blue for maritime wearers.
They also featured loops to attach brush to, a feature that later Cascadian derived uniform designs will have.

Along with this, white camouflage overwhites for use in snowy environments were also issued.


In the early 1930's, with the help of a German art professor known as "J. Schick", the Cascadian company ACME came out with a six-color camouflage pattern that was, aside perhaps from color shades being adjusted to fit Cascadian terrain better, very similar to World War two era Waffen-SS camouflage with patterns for all seasons.
There are also two similar variants, one for maritime use with only four colors, being dominant navy blue with deck gray, haze gray, & black, & a three-color variant for urban use, that is charcoal gray dominant with tan & sage green.

This camouflage pattern is designated as the "Dot Pattern Family", or DPF.

An experimental five-color version of the DFP in a color scheme similar to MultiCam was also produced for troops who are deployed to diverse environments &/or to troops who, for whatever reason, cannot practically have multiple specialized camouflage patterns on hand. This was soon replaced, however.

in 1947, a new pattern, designated the "Blob pattern", was introduced. It is identical to Mil-Tec's Arid Woodland pattern. It was more commonly used to camouflage vests, belts & like gear that would be impractical for militaries to change out for different environments.

When Nations Against the New World Order was founded, Cascadian military uniforms were donated to member countries plus printing machinery so member countries can print the patterns on their own.

In the late 1970's, the "combat shirt" was created, which was like combat fatigues but with a thinner t-shirt like torso to make it more comfortable to wear & a mandarin collar to protect against chafing from slings & vest straps.

In the late 1990's, ACME developed a camouflage pattern similar to real-life Hyperstealth US4CES family called "DigiFractalCam", with a total of fifteen patterns which are to be worn depending on the specific environment that they're to be used in.
Another 30 have been created mainly for commercial sales & for use by troops stationed at or operating in highly specific environments.
A digital maritime pattern was also made for wear in maritime environments in order to prevent personnel on the exterior of watercraft from potentially increasing their craft's infrared or radar signature or becoming targets. The blue-dominant pattern also hides the wearer when they fall into blue water to prevent them from being targeted by the enemy.

The "21st Century Work Uniform", the 21CWU, is identical to Crye Precision's G3 Combat Apparel. A fire resistant version is made out of 80% Modacrylic, 15% Viscose, 5% X-Static. An "Extra Light" variant is more similar to Beyond Clothing's A9-E, made out of a Cordura blend that contains at least 60% Egyptian cotton.

Trivia:
. The use of blue and gray dominant camouflage patterns for uniforms & gear worn by maritime personnel while underway (Naval, Coast Guard, & Marine boarding teams) was inspired by the articles Jamaica Defence Force (JDF) selects Hyperstealth's Camouflage for their Ground and Naval Uniforms & Get thrown into the water, you die in modern U.S. Navy/Abandon Ship! Prepare to Die!: How the U.S. Navy lives in Denial and is not ready for combat, which talks about the need for naval troops' uniforms to provide near-infrared resistance & to camouflage them while in the water to conceal them from enemies trying to kill them.

No comments:

Post a Comment